Subnetberegner
Vælg et netværk og en ny præfikslængde for at opdele det i lige store subnet.
4 subnet på /24
| # | Netværksadresse | Brugbart område | Broadcastadresse | Brugbare værter |
|---|---|---|---|---|
| 1 | 10.0.0.0/24 | 10.0.0.1 – 10.0.0.254 | 10.0.0.255 | 254 |
| 2 | 10.0.1.0/24 | 10.0.1.1 – 10.0.1.254 | 10.0.1.255 | 254 |
| 3 | 10.0.2.0/24 | 10.0.2.1 – 10.0.2.254 | 10.0.2.255 | 254 |
| 4 | 10.0.3.0/24 | 10.0.3.1 – 10.0.3.254 | 10.0.3.255 | 254 |
Denne tekst findes endnu ikke på dansk. Den vises på engelsk, indtil en oversættelse er udgivet.
Subnetting divides one network into smaller, equally sized networks by lengthening the prefix. Every extra bit doubles the number of subnets and halves their size: a /24 split into /26 gives four networks of 64 addresses each.
Pick a network and the new prefix length. The table lists each resulting subnet with its usable range — useful for planning VLANs, cloud VPC subnets or IPv6 site allocations. For IPv6, the common unit for a single LAN is a /64; sites typically receive a /48 or /56.
Ofte stillede spørgsmål
How do I split a /24 into four subnets?
Use /26. Adding two bits to the prefix (24 + 2) creates 2² = 4 subnets of 64 addresses: .0/26, .64/26, .128/26 and .192/26.
Why should IPv6 LANs use /64?
SLAAC address autoconfiguration and many IPv6 features assume a 64-bit interface identifier, so subnets smaller than /64 break standard behaviour.
Can subnets be different sizes?
Yes — that is variable-length subnet masking (VLSM). Calculate each block separately and make sure the ranges don't overlap.